The chiller
A commercial chiller cools incoming mains water and holds it at your set point.
Your cold tap runs at about 29°C. We bring it down to single digits, at the push of a button.
In most buildings here, the "cold" shower is 29°C. About as warm as the sea off East Coast Park.
No chill, no shock, no recovery. The pipes sit in the heat all day, so the water does too. Scroll on and watch the temperature fall.
The chiller cools mains water before it reaches the shower head.
That's the whole experience for your members. You set the temperature and how long each blast lasts. They press one button.
Three parts, installed by our team. Your existing shower room stays where it is.
A commercial chiller cools incoming mains water and holds it at your set point.
Chilled water travels through insulated pipe, so it stays cold in our heat.
A wall button starts a timed cold blast. One chiller can run several showers.
Systems are usually set between about 4°C and 15°C. We confirm what your building can achieve during the site survey.
It depends on chiller size, pipe length and peak-hour use. Most facilities run several showers from one unit.
Usually not. The chiller goes in a plant or service room and we run an insulated line to your existing showers. We check power, space and routing on site.
No daily water treatment. We schedule periodic servicing and support you locally in Singapore.
It depends on the number of showers, the distance from the plant room and site conditions. Book a free site survey and we'll send a written quotation.
No. Anyone pregnant, with a heart condition or a condition affected by cold should check with a doctor first. We recommend posting usage guidance at every installation.
Tell us about your facility. We'll visit, check space, power and pipe routing, then send a quotation.